עמוד ראשי  |  התחבר או אם אינך עדיין רשום, הרשם בחינם.
  בלוגר  
אודות
קבלת עדכונים
רוצים לקבל הודעה במייל בכל פעם שהבלוג שלי מתעדכן ?

עדכוני RSS
חיפוש
נושאים
ארכיון
Types of Fume Hoods and Safety Tips
17/04/2018 13:24
modularlabfurniture
Fume Hood

Fume hoods are laboratory accessories that forestall workers from being exposed to hazardous and dangerous fumes whereas operating on them. In the early days, they were created of wood. Today, they are created of gentle steel coated with epoxy. The change in construction and vogue has been introduced to make them safer for laboratory workers. There are two main varieties of hoods, the ducted and the re-circulating ones. In both units, air is drawn in from the front of the cabinet by use of an admirer, and either expelled outside the building or filtered then fed back to the workplace.

Re-circulating fume hoods

This kind of hood is used for educational functions, or in buildings that do not allow external ductwork to be fitted. In addition, this hood includes a fan fixed on high, or below the worktop. It sucks air through the opening in front of the hood and later through a filter; the air passes through the fan and finally is fed back to the workplace. Re-circulating fume hoods or custom size fume hoods are of different sizes. Their sizes vary from 4 'to 8'. However, some companies will build hoods to suit your laboratory specifications.

The main disadvantage of this type of hood is that employees working close to those fume hoods are additional apparently to be exposed to harmful chemicals than when using ducted fume hoods. The opposite health concern is that staff working close to this hood are exposed to noise as a result of the extract fan is near the workplace.

Ducted fume hoods

These type of fume hoods are for industrial functions. They remove air from the workspace and disperse it into the atmosphere. In order to boost indoor air quality, some labs use single-pass air handling systems, where heated or cooled air is used once and then discharged. On the other hand, labs that need to minimize energy prices sometimes use return air systems that provide adequate ventilation rates and acceptable working conditions.

The main advantage of this kind of industrial fume hood is that it allows workers to figure in a safe atmosphere by eradicating fumes from the workplace and by reducing noise pollution thanks to the distance of the fan from the workplace. The main disadvantage is that it desires further ductwork and so is additional expensive. It also pollutes the atmosphere as a result of it does not treat the fumes that disperse into the atmosphere.

Safety tips to consider when dealing with or using fume hoods

·          If attainable, work with less hazardous materials to reduce the possibilities of exposure to harmful fumes.

·          Build sure that the exhaust fans of hoods are functioning properly to make sure that your workplace is free from air pollution.

·          Do not place your head inside the hood to avoid exposure to harmful fumes.

·          In order to minimize the price of energy utilized by hoods, continue to close the hood sash.

·          Nothing bought to be stored or disposed within the hood to prevent the blockage of airflow.

To confirm that your fume hoods manage the hazards posed by chemical vapors or airborne substances, it is vital to let the professionals of the companies that build the hoods, install them if you are not acquainted with them.

0 תגובות
Laboratory Sinks Manufacturer from Ahmedabad,
17/04/2018 13:22
modularlabfurniture
Laboratory Sinks

There are three main varieties of laboratory sinks; complete stainless-steel worktops with integral bowls, inset steel sinks and steel sit-on sinks. These are all made in stainless-steel, that is employed for its acid and chemical resistance. The complete worktop can embrace a composition of integral bowls in an exceptionally selection of sizes. These tend to possess a choice of sizes obtainable for bowls and configurations. Inset sinks and bowls will have an integral drainer or be individual inset bowls. Usually these are set into the work surface; faucets will be set into the work surface or into the steel prime.

This kind of sink is particularly helpful when it desires to be combined with an existing work surface. Sit-on sinks have more variety still; they provide greater flexibility to suit the laboratory space and can be mounted straight onto new or existing laboratory furniture without the necessity for an existing worktop. Many laboratories choose stainless steel laboratory sinks; This is often thanks to steel's sturdiness and chemical resistant qualities, that for obvious reasons is essential to a working lab. Steel is additionally a resilient material meaning it does not have to get replaced normally, and is there a value economic material to use.

Why stainless-steel is so fashionable for laboratory sinks

Steel is a predominantly standard material for laboratory sinks; this is thanks to its comparatively low initial cost plus its long life making the initial outlay additional value-effective over the long run. It contains a terribly high degree of sturdiness and is strong enough to stand up to long-term significant use. It's an straightforward surface to scrub, laundry with just liquid soap and water is all that is required, meaning cleaning is easy in hygienic environments (eg hospitals and laboratories). Chrome steel is also in style due to its neutral color, and engaging aesthetic finish, therefore can be matched with most decors. Another glorious feature of chrome steel is that it's lightweight-weight, given its level of strength and durability.

Stainless steel laboratory sinks are eco-friendly

Steel is understood for its long-lasting resilience; that this material is very suited for recycling. Usually the sink can have accumulated little damage and would there before be of a fairly high value. This ability to recycle the material plays a task within the sustainable development that's being progressed in the planet.

The production of stainless-steel

Stainless-steel is made of mostly iron ore, nickel, chromium and silicon. These are melted together in an exceptionally furnace, that will take up to 12 hours. The mix is ​​then solid into the required form, then heat-treated, cleaned and at last polished. This sort of metal can afford to be of a coffee worth thanks to its easy availability.

0 תגובות
Important Aspects of Clean Room Furniture
21/02/2018 10:06
modularlabfurniture
Clean Room Furniture, Laboratory stools

Buying  for laboratory furniture & Clean Room Furniture can be a meticulous task. This is for the actual fact that appropriate and practical furniture is an important half any well-designed laboratory. There are many companies that manufacture and sell lab furniture. However, though the provision of laboratory furniture is vast, selecting lab furniture for a selected laboratory is not that straightforward. It is not as simple as just selecting a stool or a lab bench. There are several considerations that ought to be kept in mind when getting laboratory furniture. To begin with, you need to travel to a most popular and reputable supplier. The provider should be ready to discuss with you what they offer and you would like to provide them info about your desires.

After you've got discussed your wants to a preferred laboratory furniture & Clean Room Furniture provider, they ought to then prepare a formal written proposal or quotation. It's essential that you feed the provider as a lot of data as potential about your necessities and if potential, set a deadline for the delivery of your laboratory furniture. However before you do this, make certain to think about a number of the foremost important things:

· The specific kind of laboratory furniture that's suitable for your laboratory.

· Suppose concerning the functions that your laboratory will perform.

· Know some extras that may be offered by the suppliers.

Below is some essential laboratory furniture that is commonly included in a lab. And largely probably, your lab will want them also.

· Laboratory benches - This laboratory furniture are necessary and are a should-have for labs. A well operating lab needs to own several items of lab benches. Not solely that they will offer ergonomics for the users, but can complete the lab's total functionality.

· Buying  Laboratory stools - Lab stools are the key elements of a laboratory.  The size of the lab, the number of lab technicians, and also the lab equipments greatly influences the functionality of the lab. With sensible designed laboratory furniture like stools that require less house, individuals will realize it straightforward to move around.

 

There is a lot of other furniture that you would possibly need and in order to induce the simplest ones that will fit your lab, it is essential that you decide on a trusted furniture supplier. They sure can give you a checklist of furniture that you may would like and even give you excellent discounts. More than that, they too can assist you with the delivery still because the setup or installation of your chosen furniture.

 

Above all these, the most useful advice is to contemplate the security of the Buying  clean room furniture. It should complement the protection features of your lab design. Aside from issues of safety, it too should go along well with the adaptability and suppleness of the lab. If you've got all the means to afford a brand new furniture, that will be great, however if you are somewhat operating on a budget, you continue to can get high-finish, but slightly used furniture. However, if you choose used lab furniture, make sure that they're still in mint condition and can accommodate the wants of your lab.

0 תגובות